Dukes Fuel Pump. The Dukes Fuel Pump P/N 4140-00 delivers reliable fuel system performance for aircraft operations.

Pilots depend on fuel pumps to maintain consistent fuel pressure during all phases of flight.

This component supports safe engine operation and dependable fuel delivery.

Dukes fuel pumps remain widely trusted across general aviation aircraft.

Operators rely on these pumps for durability and proven performance.

This model continues to support a wide range of aircraft fuel systems.

This unit features a 28 volt electrical configuration.

Many aircraft operate with 28 volt systems for stable power distribution.

Proper voltage compatibility ensures reliable pump operation.

Dukes Fuel Pump

Overhauled Condition for Restored Performance

This Dukes fuel pump has undergone a complete overhaul process.

Technicians restored internal components to ensure proper mechanical function.

Overhaul work improves reliability and operational performance.

Serviced components reduce wear and restore system efficiency.

Aircraft owners benefit from renewed performance capability.

Overhauled units offer extended service life potential.

Maintenance professionals often prefer overhauled fuel system components.

Restored equipment supports dependable aircraft operation.

This adds value for both maintenance and replacement applications.

Dukes Fuel Pump

Includes FAA 8130 Airworthiness Certification

This fuel pump includes an FAA 8130 airworthiness approval form.

The 8130 certification confirms inspection by qualified aviation personnel.

Technicians rely on this documentation during installation.

The 8130 form provides traceability and regulatory compliance.

Maintenance teams use it to verify component condition.

Certified parts simplify aircraft maintenance procedures.

Aircraft owners benefit from properly documented components.

Certification increases confidence in the equipment.

This ensures compliance with aviation standards.

Dukes Fuel Pump

Essential Role in Aircraft Fuel Systems

Fuel pumps play a critical role in maintaining engine performance.

They ensure steady fuel flow from the tank to the engine.

Consistent fuel delivery supports stable combustion.

Pilots rely on fuel pumps during engine start and high demand conditions.

Proper fuel pressure prevents engine interruptions.

Reliable pumps contribute to safe flight operations.

Aircraft fuel systems require dependable components for proper function.

Strong pump performance supports efficient engine operation.

Reliable equipment enhances overall aircraft safety.

Dukes Fuel Pump

Part Number Identification P/N 4140-00

This unit carries manufacturer part number 4140-00 for identification.

Technicians use part numbers to confirm compatibility with aircraft systems.

Accurate identification supports efficient maintenance procedures.

Correct part numbers help prevent installation errors.

Maintenance teams rely on clear references for component selection.

Proper documentation supports organized aircraft service records.

Part numbers also assist during inspections and troubleshooting.

Technicians use them for system verification and evaluation.

Accurate identification supports safe aircraft operation.

Dukes Fuel Pump

28 Volt Electrical Configuration

This fuel pump operates on a 28 volt electrical system.

Many aircraft use 28 volt systems for consistent power delivery.

Proper voltage ensures stable pump operation.

Correct electrical configuration protects the fuel pump from damage.

Technicians verify voltage compatibility during installation.

Reliable power supply supports consistent performance.

Multi system compatibility increases the usability of the pump.

Aircraft owners benefit from flexible installation options.

This enhances the value of the component.

Used Condition – Overhauled and Serviceable

This unit remains in used condition but has been fully overhauled.

The overhaul process restores the pump to serviceable condition.

The unit is ready for inspection and installation.

Used aviation components often support ongoing aircraft maintenance.

Overhauled parts provide a balance between cost and performance.

Many operators rely on serviceable components.

Maintenance professionals inspect components before installation.

Inspection ensures compliance with operational requirements.

Reliable parts support safe aircraft performance.

30 Day Warranty for Buyer Confidence

This Dukes fuel pump includes a 30 day warranty period.

The warranty provides additional assurance for the buyer.

Aircraft owners can evaluate performance after installation.

Warranty coverage demonstrates confidence in the product condition.

Buyers gain peace of mind during procurement.

This adds value to the component.

Reliable equipment should perform consistently during operation.

Warranty protection supports customer confidence.

This ensures satisfaction with the purchase.

Ideal for Maintenance and Replacement Applications

This Dukes fuel pump suits aircraft maintenance and replacement projects.

Operators replace fuel pumps during service intervals or system upgrades.

Reliable components help maintain fuel system performance.

Maintenance facilities seek overhauled and certified components.

Proper documentation simplifies installation procedures.

Quality equipment supports efficient aircraft servicing.

Aircraft owners benefit from dependable fuel system components.

Consistent fuel delivery improves engine reliability.

This pump offers strong value for compatible aircraft systems.

Proven Dukes Fuel Pump Reliability

The Dukes 4140-00 fuel pump delivers dependable fuel system performance.

Its overhauled condition restores functionality and reliability.

Pilots rely on consistent fuel pressure during flight operations.

The included 8130 certification supports compliance and traceability.

The 30 day warranty adds confidence for buyers.

This pump remains a reliable solution for aircraft fuel system maintenance and replacement needs.

The post Dukes Fuel Pump appeared first on Aviation Spare Parts Store.

Dukes Auxiliary Fuel Pump. The Dukes auxiliary fuel pump P/N 4140-00-17 delivers reliable fuel system support for aircraft operations.

Pilots depend on auxiliary pumps to maintain consistent fuel pressure during critical flight phases.

This component supports safe engine performance and dependable fuel delivery.

Dukes fuel pumps have earned a strong reputation across general aviation aircraft.

Operators trust these pumps for durability and consistent operational reliability.

This unit continues to serve as a dependable solution for fuel system support.

The pump was removed from a 1965 Cessna 182H aircraft.

Cessna 182 models remain widely used in general aviation operations.

Reliable fuel system components help maintain their performance and safety.

Dukes Auxiliary Fuel Pump

Essential Role in Aircraft Fuel Systems

Auxiliary fuel pumps support proper fuel flow to the engine.

They provide additional pressure during engine start and high demand conditions.

Reliable fuel delivery helps maintain stable engine operation.

Pilots use auxiliary pumps during takeoff, climb, and emergency situations.

Consistent fuel pressure prevents interruptions in engine performance.

Proper fuel flow supports efficient combustion and engine reliability.

Fuel system components must perform reliably under varying conditions.

Auxiliary pumps ensure steady fuel supply during demanding operations.

This contributes to overall aircraft safety and performance.

Dukes Auxiliary Fuel Pump

Tested and Verified Operational Performance

This Dukes fuel pump has undergone operational testing.

The unit demonstrated proper function during testing procedures.

Testing confirms readiness for inspection and potential installation.

The pump operates on a 14 volt system.

Testing confirmed functionality at 12 volts during evaluation.

Reliable electrical performance supports consistent operation.

Verified components provide increased confidence for aircraft owners.

Maintenance professionals rely on tested equipment for dependable results.

Proper testing supports safe aircraft operation.

Dukes Auxiliary Fuel Pump

Compatible with Cessna 182 and 182H Aircraft

This auxiliary fuel pump is compatible with Cessna 182 and 182H aircraft.

These aircraft models operate widely in training and private aviation sectors.

Reliable components support continued aircraft performance.

Correct compatibility ensures proper installation within the fuel system.

Technicians rely on matching part numbers for accurate integration.

Proper fitment supports safe and efficient operation.

Maintenance teams frequently source compatible pumps for these aircraft.

Replacement components help maintain fuel system functionality.

Reliable parts support long term aircraft operation.

Dukes Auxiliary Fuel Pump

Part Number and Serial Identification

This unit carries part number 4140-00-17 for accurate identification.

Technicians use part numbers to verify compatibility with aircraft systems.

Correct identification supports efficient maintenance procedures.

The pump includes serial number 2021 for tracking and documentation.

Serial numbers help maintain organized service records.

Accurate records support proper maintenance planning.

Clear identification ensures proper documentation and traceability.

Maintenance teams rely on these details during inspections.

This supports safe and compliant aircraft operation.

Dukes Auxiliary Fuel Pump

Total Time Since New (TTAF)

This pump has a total time since new of 3,842.2 hours.

Time tracking provides important insight into component usage.

Maintenance professionals use this information during evaluation.

Recorded hours help determine inspection and service requirements.

Proper tracking supports accurate maintenance planning.

Reliable documentation improves confidence in the component.

Understanding total time helps assess remaining service life.

Technicians evaluate condition based on usage history.

This supports informed maintenance decisions.

Dukes Auxiliary Fuel Pump

Used Condition with Inspection Guarantee

This pump remains in used condition and shows normal operational wear.

The unit has been tested and confirmed operational.

It is offered with a guarantee to pass inspection.

The guarantee provides added confidence for buyers.

Aircraft owners can evaluate the pump during inspection.

This reduces risk during procurement.

Inspection readiness is critical for aviation components.

Maintenance professionals verify condition prior to installation.

Reliable parts support safe aircraft operation.

Dukes Auxiliary Fuel Pump

Durable Construction for Aviation Use

Dukes fuel pumps feature strong construction for demanding aviation environments.

They withstand vibration, pressure variations, and continuous use.

Durable materials support long term reliability.

Aircraft fuel systems require dependable components for safe operation.

Strong construction ensures consistent fuel delivery performance.

Reliable pumps support smooth engine operation.

Maintenance professionals prefer proven fuel system designs.

Dukes continues to produce reliable aviation components.

Quality construction supports efficient aircraft performance.

Ideal for Maintenance and Replacement Applications

This Dukes auxiliary fuel pump suits maintenance and replacement needs.

Aircraft owners often replace pumps during service intervals.

Reliable components help maintain fuel system performance.

Maintenance facilities seek tested and compatible fuel pumps.

Quality components simplify installation and servicing procedures.

Reliable equipment supports efficient aircraft maintenance.

Operators benefit from dependable fuel system components.

Consistent fuel delivery improves engine reliability and safety.

This pump offers practical value for compatible aircraft.

Proven Dukes Fuel Pump Performance

The Dukes 4140-00-17 auxiliary fuel pump delivers dependable fuel system support.

Its tested condition and operational verification increase reliability.

Pilots rely on consistent fuel pressure during flight operations.

Compatibility with Cessna 182 and 182H aircraft enhances its usability.

The included inspection guarantee provides added confidence.

This pump remains a reliable choice for aircraft fuel system maintenance and replacement.

The post Dukes Auxiliary Fuel Pump appeared first on Aviation Spare Parts Store.

Garmin G5 HSI Kit. The Garmin G5 HSI Kit P/N 011-03809-00 delivers modern navigation display capability for aircraft avionics upgrades.

Pilots use this system to improve situational awareness and navigation accuracy.

Garmin designed the G5 HSI to replace legacy mechanical instruments with digital technology.

The G5 HSI provides a clear and reliable horizontal situation indicator display.

Pilots can easily interpret heading, course, and navigation data during flight.

Modern digital displays improve readability in all flight conditions.

Garmin avionics systems remain widely trusted across general aviation aircraft.

Pilots and technicians recognize Garmin for innovation and reliability.

The G5 series represents a significant advancement in cockpit instrumentation.

Garmin G5 HSI Kit

Advanced Digital HSI Display

The Garmin G5 HSI delivers precise navigation information through a digital interface.

Pilots view heading, course deviation, and navigation data on a single display.

This integration improves cockpit efficiency and reduces pilot workload.

Digital displays provide clearer information compared to traditional analog instruments.

Pilots benefit from improved visibility in varying lighting conditions.

Accurate data presentation supports better decision making during flight.

The G5 HSI enhances situational awareness during navigation operations.

Pilots maintain better control of aircraft position relative to planned routes.

Reliable display systems support safer flight operations.

Garmin G5 HSI Kit

Ideal for Avionics Upgrades

The Garmin G5 HSI Kit serves as a practical upgrade for older avionics systems.

Aircraft owners replace outdated instruments with modern digital solutions.

Upgraded systems improve both functionality and cockpit appearance.

Modern avionics upgrades increase aircraft operational efficiency.

Pilots benefit from improved navigation accuracy and system reliability.

Digital systems also reduce maintenance requirements over time.

The G5 HSI integrates well into existing avionics configurations.

Technicians install the system with minimal modification to the instrument panel.

This makes it a popular upgrade option among aircraft owners.

Garmin G5 HSI Kit

New Condition with 8130 Certification

This Garmin G5 HSI Kit is offered in new condition.

The kit includes a valid FAA 8130 airworthiness approval form.

Certification confirms compliance with aviation standards.

The 8130 form provides traceability and inspection documentation.

Maintenance professionals rely on this paperwork during installation.

Certified components simplify aircraft maintenance procedures.

New avionics equipment ensures optimal performance and reliability.

Aircraft owners benefit from unused components with full service life.

Reliable Garmin Avionics Technology

Garmin produces some of the most advanced avionics systems in aviation.

Pilots worldwide rely on Garmin equipment for navigation and communication.

The company continues to lead innovation in cockpit technology.

The G5 series reflects Garmin’s focus on performance and usability.

Pilots benefit from intuitive controls and reliable system operation.

This makes the G5 HSI a preferred choice for avionics upgrades.

Reliable avionics equipment improves overall flight safety and efficiency.

Pilots depend on accurate navigation data during every flight.

Garmin systems support consistent and dependable operation.

Part Number Identification P/N 011-03809-00

This kit carries part number 011-03809-00 for accurate identification.

Technicians use part numbers to confirm compatibility with aircraft systems.

Proper identification supports efficient procurement and installation.

Accurate documentation helps prevent installation errors.

Maintenance teams rely on correct references for avionics components.

Proper identification supports organized maintenance records.

Part numbers also assist with future servicing and inspections.

Technicians use these references for troubleshooting and system checks.

Clear identification helps maintain aircraft system integrity.

Modern Navigation Solution for Aircraft

The Garmin G5 HSI Kit provides a modern solution for aircraft navigation display needs.

Pilots benefit from improved situational awareness and navigation precision.

Digital systems enhance cockpit functionality and usability.

Aircraft owners continue upgrading avionics systems with Garmin technology.

Modern equipment improves both safety and operational performance.

The G5 HSI remains a popular choice for avionics modernization projects.

For aircraft owners and maintenance professionals, this kit offers excellent value.

The Garmin G5 HSI P/N 011-03809-00 delivers reliable digital navigation display capability.

It stands as a powerful upgrade solution for compatible aircraft avionics systems.

The post Garmin G5 HSI Kit appeared first on Aviation Spare Parts Store.

Bendix King KNS-80. The Bendix King KNS-80 avionics unit delivers reliable navigation capability for general aviation aircraft.

Pilots use this system to manage multiple navigation functions during flight operations.

The KNS-80 remains one of the most versatile navigation units installed in many aircraft.

Bendix King designed the KNS-80 to combine several navigation technologies in one unit.

This avionics system integrates VOR, localizer, DME, RNAV, and glideslope capabilities.

Pilots benefit from multiple navigation tools within a single cockpit instrument.

Many general aviation aircraft continue to operate with KNS-80 avionics systems.

Aircraft owners value the system for reliability and operational versatility.

This model remains widely recognized within aviation maintenance communities.

Bendix King KNS-80

Multi Function Navigation System

The KNS-80 supports several important navigation functions used in aviation.

Pilots use the VOR receiver to track and follow ground based navigation signals.

The localizer receiver assists with precise runway alignment during instrument approaches.

The DME function measures aircraft distance from navigation stations.

Distance information helps pilots confirm aircraft position along a route.

Accurate distance data supports precise navigation planning.

The RNAV capability allows pilots to navigate using stored waypoints.

RNAV systems improve route flexibility during flight operations.

Pilots can follow programmed routes between navigation points.

Bendix King KNS-80

Integrated Glideslope Capability

The Bendix King KNS-80 also supports glideslope signal reception.

Glideslope guidance assists pilots during instrument landing system approaches.

Accurate vertical guidance helps maintain proper descent path.

Reliable glideslope signals support safer landing operations during low visibility conditions.

Pilots rely on these signals to maintain correct glide path alignment.

Precise descent guidance improves landing accuracy.

Combining glideslope capability with other navigation functions increases cockpit efficiency.

Pilots operate fewer separate instruments within the avionics panel.

Integrated systems help simplify flight management.

Bendix King KNS-80

Tested Working and Verified Performance

This Bendix King KNS-80 unit has been tested for proper operation.

Testing confirmed that the system powers on and functions correctly.

Operational verification helps confirm equipment reliability.

The unit remains in good used condition based on visual inspection.

Listing photos show the exact item included in the sale.

Buyers receive the specific avionics unit shown.

Proper testing increases confidence for aircraft owners and technicians.

Functional avionics equipment helps maintain reliable cockpit systems.

Tested equipment supports dependable flight operations.

Bendix King KNS-80

Durable Avionics Design

Bendix King avionics equipment has supported general aviation aircraft for decades.

The KNS-80 reflects proven engineering and reliable electronic design.

Many aircraft operators continue to rely on this system.

Avionics units must perform reliably within demanding cockpit environments.

Aircraft vibration and temperature variations challenge electronic equipment.

Strong construction helps protect internal avionics components.

Reliable navigation equipment improves overall flight safety.

Pilots depend on accurate navigation information during every flight.

Durable avionics systems support consistent performance.

Part Number Identification P/N 066-4008-00

This navigation unit carries manufacturer part number 066-4008-00.

Technicians use part numbers to verify avionics compatibility.

Accurate identification supports efficient aircraft maintenance procedures.

Correct part numbers help technicians source proper replacement equipment.

Maintenance teams rely on clear references when installing avionics units.

Proper documentation supports organized aircraft service records.

Part identification also assists during troubleshooting and inspections.

Reliable documentation helps maintain accurate maintenance logs.

Accurate records support continued aircraft operation.

Ideal for General Aviation Aircraft

The King KNS-80 remains suitable for many general aviation aircraft.

Pilots appreciate its multi function navigation capabilities.

Maintenance technicians continue to support this avionics system.

Aircraft with legacy avionics systems often require compatible replacement units.

Serviceable equipment helps maintain operational avionics installations.

Reliable parts help extend the life of existing cockpit systems.

Maintenance facilities frequently seek dependable used avionics components.

Quality equipment supports ongoing aircraft servicing needs.

Reliable avionics help reduce aircraft downtime.

90 Day Warranty for Added Confidence

This Bendix King KNS-80 includes a ninety day warranty period.

Warranty coverage provides additional assurance for the buyer.

Buyers can evaluate equipment performance during this period.

Reliable avionics equipment should perform consistently during operation.

Warranty support demonstrates confidence in the equipment condition.

This coverage increases buyer confidence.

Dependable avionics remain essential for safe aircraft operation.

Clear navigation guidance supports accurate flight planning.

Reliable systems help maintain safe flight operations.

Trusted Bendix King Navigation Technology

Bendix King remains a respected name within aviation avionics technology.

Pilots recognize the brand for dependable navigation and communication equipment.

Many aircraft continue to operate with Bendix King systems.

The KNS-80 unit represents a versatile navigation solution for general aviation aircraft.

Its multiple navigation capabilities support efficient flight management.

Pilots rely on its proven performance during flight operations.

This transponder offers strong value.

The unit has been tested working and remains in good used condition.

It provides dependable navigation capability for compatible aircraft avionics systems.

The post Bendix King KNS-80 VOR/LOC/DME/RNAV/GS appeared first on Aviation Spare Parts Store.

Tailwheel Mounting Bracket Assembly. The Cessna 120 / 140 Tail Wheel Mounting Bracket Assembly supports tailwheel installation on classic Cessna aircraft.

This structural component holds the tailwheel system in correct alignment.

Proper mounting ensures stable ground handling during aircraft operations.

Aircraft tailwheel brackets handle significant loads during taxi, takeoff, and landing.

Strong structural support protects the tailwheel assembly from stress and misalignment.

Reliable mounting hardware maintains safe aircraft ground performance.

Many classic tailwheel aircraft depend on properly maintained structural components.

Owners often replace worn brackets during restoration or maintenance projects.

A dependable bracket supports long term aircraft operation.

Tailwheel Mounting Bracket Assembly

Designed for Cessna 120 and Cessna 140 Aircraft

This mounting bracket assembly fits Cessna 120 and Cessna 140 aircraft.

Both aircraft models represent popular classic tailwheel designs in general aviation.

Owners continue to maintain these aircraft across restoration and operational fleets.

The bracket supports correct placement of the tailwheel assembly.

Accurate alignment helps maintain predictable ground steering behavior.

Pilots benefit from improved stability during taxi and landing roll.

Aircraft restoration specialists frequently search for original replacement parts.

Correct structural components help maintain authentic aircraft configuration.

Proper parts also simplify installation during maintenance work.

Tailwheel Mounting Bracket Assembly

Tailwheel Structural Support Component

The tailwheel mounting bracket forms a critical structural connection on the aircraft.

It connects the tailwheel assembly to the aircraft structure.

Strong mounting ensures the tailwheel remains secure during operation.

Tailwheel systems experience continuous vibration and ground impact loads.

A strong bracket distributes these forces safely through the aircraft structure.

Reliable components help maintain aircraft integrity during use.

Maintenance teams inspect mounting brackets during aircraft servicing.

Worn or damaged brackets require replacement to maintain safe operation.

Quality replacement parts support proper aircraft maintenance.

Tailwheel Mounting Bracket Assembly

Part Number 0412139 Identification

This component carries part number 0412139 for identification.

Aircraft technicians use part numbers to confirm compatibility with aircraft systems.

Accurate identification simplifies procurement and installation procedures.

Correct part numbers help prevent installation errors during maintenance.

Technicians rely on accurate references when sourcing aviation components.

Proper identification supports efficient aircraft servicing.

This assembly also includes reference number 2553.

Reference numbers assist with tracking parts within maintenance inventories.

Clear identification helps support organized aircraft maintenance operations.

Tailwheel Mounting Bracket Assembly

Used Condition – Selling as Removed

This tailwheel mounting bracket assembly remains in used condition.

The component comes directly from aircraft removal.

It remains available as removed without additional refurbishment.

Aircraft maintenance operations frequently utilize serviceable used components.

Such parts support restoration and ongoing maintenance of classic aircraft.

Many aircraft owners seek authentic original components.

Used aviation components help support aging aircraft fleets.

Replacement parts maintain operational readiness for classic aircraft models.

This approach helps extend aircraft service life.

Ideal for Classic Aircraft Restoration Projects

Restoration specialists often search for structural components like this bracket assembly.

Classic aircraft restoration requires authentic parts whenever possible.

Original components help maintain historical accuracy.

Cessna 120 and 140 aircraft remain popular among vintage aircraft enthusiasts.

Many owners restore these aircraft to preserve aviation history.

Reliable parts support successful restoration projects.

Aircraft maintenance facilities also maintain spare parts inventories.

Having replacement structural components supports future maintenance needs.

Proper inventory helps reduce downtime during repairs.

Reliable Component for Tailwheel Aircraft Maintenance

The Cessna 120 / 140 Tail Wheel Mounting Bracket Assembly provides essential structural support.

Proper mounting ensures the tailwheel operates with correct alignment.

Reliable brackets contribute to safe aircraft ground handling.

Aircraft owners depend on durable structural components for continued operation.

Strong brackets help maintain stability during ground maneuvers.

Dependable equipment supports long term aircraft reliability.

For owners, restorers, and maintenance professionals, this component offers practical value.

The 0412139 Tail Wheel Mounting Bracket supports classic Cessna aircraft maintenance.

It remains a useful replacement part for Cessna 120 and 140 tailwheel aircraft.

The post Tail Wheel Mounting Bracket Assembly appeared first on Aviation Spare Parts Store.

Scott 3200A Tailwheel Assembly. The Scott 3200A Tailwheel Assembly delivers reliable ground handling for tailwheel aircraft.

Pilots trust this model for stable steering during taxi, takeoff, and landing.

Aircraft owners choose the Scott 3200A for durability and consistent performance.

Tailwheel assemblies control aircraft movement on runways, taxiways, and ramps.

A strong tailwheel improves directional control during ground operations.

Reliable components increase safety and confidence during aircraft handling.

The Scott 3200A remains a popular choice among tailwheel aircraft owners.

Its proven design supports dependable operation in many aviation environments.

Pilots and mechanics rely on this model for restoration and replacement projects.

Scott 3200A Tailwheel Assembly

Fully Rebuilt with New Univair Parts

This Scott 3200A tailwheel assembly includes a complete rebuild using new Univair parts.

Technicians installed high quality components to restore mechanical performance.

New parts ensure smooth operation and reliable functionality.

Univair manufactures trusted replacement components for aviation maintenance.

Aircraft mechanics often choose Univair parts for restoration and repair work.

Quality components help maintain strong tailwheel performance.

A full rebuild restores the strength and reliability of the assembly.

New internal components reduce wear and improve mechanical movement.

This rebuild creates a dependable solution for aircraft owners.

Scott 3200A Tailwheel Assembly

Ready for Immediate Installation

This tailwheel assembly arrives fully prepared for installation.

Mechanics can install the unit without additional preparation.

The rebuild ensures proper mechanical function.

Aircraft owners benefit from equipment ready for installation.

Quick installation saves time during maintenance procedures.

Prepared components simplify aircraft repair and upgrade projects.

Reliable tailwheel systems support smooth aircraft maneuvering on the ground.

Strong steering control improves taxi and ramp operations.

Proper equipment helps maintain safe aircraft movement.

Scott 3200A Tailwheel Assembly

Tire and Tube with Remaining Service Life

The rebuild retained the existing tire and tube assembly.

Both components still provide usable service life.

Aircraft owners can continue operating with the current tire.

Maintaining usable components helps control maintenance costs.

Operators can replace the tire later when necessary.

This approach provides practical value for aircraft owners.

A dependable tire supports traction during taxi and landing roll.

Strong ground contact improves stability and directional control.

Reliable tires help maintain safe aircraft operations.

Scott 3200A Tailwheel Assembly

Durable Construction for Aviation Operations

Scott tailwheel assemblies feature strong and durable construction.

These components withstand demanding aviation ground environments.

Aircraft tailwheels experience vibration, impact, and repeated use.

High quality materials support structural strength and reliability.

Strong components maintain consistent steering performance.

Pilots depend on durable equipment during ground operations.

A rebuilt assembly restores the original performance of the tailwheel.

New components improve mechanical movement and reliability.

Proper maintenance supports long term operational use.

Scott 3200A Tailwheel Assembly

Ideal for Tailwheel Aircraft Restoration

Aircraft restoration specialists often select the Scott 3200A tailwheel.

Many classic and vintage aircraft use this tailwheel model.

Its design supports traditional tailwheel aircraft configurations.

Restoration projects require dependable aviation components.

Rebuilt parts provide both authenticity and mechanical reliability.

This assembly fits many restoration and maintenance applications.

Aircraft owners frequently choose the Scott 3200A for upgrades.

The model delivers consistent performance across many aircraft types.

Its reputation makes it a trusted choice in aviation.

Trusted Tailwheel Model in General Aviation

The Scott 3200A tailwheel remains one of the most recognized models in aviation.

Pilots value its simple design and dependable steering performance.

Aircraft operators rely on this tailwheel for reliable ground handling.

A rebuilt tailwheel improves aircraft operational readiness.

Reliable ground control increases pilot confidence during operations.

Strong components support safe aircraft movement.

This fully rebuilt Scott 3200A tailwheel offers excellent value.

New Univair parts restore strength and mechanical performance.

The assembly stands ready for installation on compatible tailwheel aircraft.

The post Scott 3200A Tailwheel Assembly appeared first on Aviation Spare Parts Store.

Scott 3200 Tailwheel Assembly. The Scott 3200 Tailwheel Assembly is a trusted component used on many tailwheel aircraft.

It provides dependable ground handling during taxi, takeoff, and landing operations.

Pilots rely on this assembly for stable steering and smooth aircraft maneuverability.

The Scott 3200 model is widely recognized in general aviation aircraft.

Its proven design supports reliable performance in demanding operational environments.

Many aircraft owners prefer this model for restoration or replacement needs.

Tailwheel assemblies are critical for aircraft ground control.

A properly maintained tailwheel improves directional stability during ground operations.

Reliable components contribute to safer and smoother aircraft handling.

Scott 3200 Tailwheel Assembly

Recently Serviced for Peak Performance

This Scott 3200 tailwheel assembly was recently disassembled and professionally serviced.

The unit was cleaned, greased, and carefully reassembled for optimal performance.

Proper servicing helps ensure smooth mechanical operation and dependable functionality.

Regular maintenance helps extend the life of tailwheel assemblies.

Cleaning removes debris that may affect performance over time.

Lubrication allows internal components to operate smoothly.

A recently serviced unit provides additional confidence for aircraft operators.

Maintenance ensures that all moving parts operate as intended.

This preparation helps support reliable aircraft ground handling.

Scott 3200 Tailwheel Assembly

New Tube and Tire with Minimal Use

The tailwheel includes a newly installed tube and tire assembly.

These components have only two hours of operational use.

Minimal usage ensures the tire remains in excellent working condition.

New tire components improve traction during taxi and landing roll.

Proper tire condition supports stable ground contact and control.

Reliable tires contribute to safer aircraft ground operations.

Low use components are valuable for aircraft owners and maintenance teams.

Minimal wear allows the tire assembly to deliver extended service life.

This enhances the overall value of the tailwheel assembly.

Scott 3200 Tailwheel Assembly

Five Friction Plate Springs for Improved Control

This Scott 3200 tailwheel assembly includes five friction plate springs.

Friction springs help regulate steering resistance during aircraft movement.

They provide smoother and more controlled tailwheel steering response.

Proper friction spring tension supports stable ground maneuvering.

Pilots benefit from improved directional control during taxi operations.

This design helps prevent sudden steering changes.

Enhanced spring configurations are often preferred by experienced aircraft operators.

Additional friction plates can improve handling on uneven surfaces.

This feature supports consistent and predictable steering behavior.

Scott 3200 Tailwheel Assembly

20 Degree Breakaway Pawl System

The assembly includes a 20 degree breakaway pawl configuration.

Breakaway systems allow the tailwheel to unlock during sharp turns.

This helps prevent excessive stress on steering components.

Controlled breakaway improves maneuverability in tight ground situations.

Pilots can safely maneuver aircraft in confined ramp areas.

The breakaway mechanism supports flexible aircraft movement.

This feature also protects the tailwheel from excessive steering loads.

Reducing stress helps extend the lifespan of the assembly.

Reliable breakaway systems support long term mechanical durability.

Durable Construction for Aviation Use

Scott tailwheel assemblies are known for strong and reliable construction.

These components are built to handle the demands of aircraft ground operations.

Durability ensures dependable performance during repeated use.

Aircraft tailwheels experience constant vibration and ground impact forces.

High quality materials help maintain structural strength under these conditions.

Strong construction supports long term operational reliability.

Maintenance professionals value durable aircraft components.

Reliable assemblies help reduce unexpected maintenance issues.

This contributes to safe and efficient aircraft operation.

Ideal for Restoration and Aircraft Maintenance

Many classic and vintage aircraft rely on this tailwheel model.

Its proven design makes it a trusted component for restoration work.

Aircraft owners often replace worn tailwheel assemblies during maintenance.

Installing a serviced unit restores smooth steering performance.

Reliable components help maintain aircraft operational readiness.

Maintenance professionals frequently seek dependable tailwheel assemblies.

Properly serviced units help simplify installation and reduce preparation time.

This makes them valuable for both repair and upgrade projects.

Reliable Tailwheel for General Aviation Aircraft

This tailwheel assembly continues supporting aircraft around the world.

Its dependable design provides stable steering and ground maneuverability.

Many pilots trust this model for its durability and performance.

Recent servicing and minimal tire use increase the value of this assembly.

Aircraft owners benefit from a component prepared for installation.

This helps support efficient aircraft maintenance and operation.

For aircraft owners, mechanics, and restoration specialists, this tailwheel offers dependable performance.

The Scott 3200 remains a respected tailwheel model in general aviation.

Its proven reliability makes it suitable for many tailwheel aircraft platforms.

The post Scott 3200 Tailwheel Assembly appeared first on Aviation Spare Parts Store.

MSA Gallet Flight Helmet. The 2021 Grey MSA Gallet Flight Helmet with integrated Bose A20 headset is professional aviation equipment.

This helmet combines advanced hearing protection, communication technology, and pilot safety features.

It is designed for demanding flight operations requiring comfort and reliable cockpit communication.

MSA Gallet helmets are widely used by professional pilots around the world.

These helmets are common among helicopter crews, rescue pilots, and tactical aviation operators.

Their design focuses on protection, communication clarity, and long mission comfort.

This particular helmet is presented in excellent condition with approximately fifty flight hours.

Low flight time examples are desirable among aviation professionals and collectors.

Minimal use helps preserve both mechanical components and interior materials.

MSA Gallet Flight Helmet

Integrated Bose A20 Noise Canceling Headset

The helmet includes the highly respected Bose A20 aviation headset system.

Bose A20 headsets are known for exceptional active noise reduction technology.

Pilots rely on this system for clear communication in loud cockpit environments.

Active noise canceling reduces engine and rotor noise significantly during flight.

Lower noise levels improve pilot focus and reduce fatigue during long missions.

Clear audio communication enhances coordination with air traffic control.

The Bose A20 system also delivers balanced audio quality for cockpit communication.

Pilots benefit from precise microphone clarity and comfortable headset design.

This combination makes the system widely trusted across aviation communities.

MSA Gallet Flight Helmet

Bluetooth Connectivity for Modern Cockpit Integration

The integrated Bose A20 headset includes Bluetooth wireless connectivity.

Bluetooth allows connection with compatible devices during flight operations.

Pilots can receive navigation alerts or communication signals wirelessly.

Wireless connectivity adds convenience inside modern cockpit environments.

Many pilots use Bluetooth for aviation applications and mobile communication.

This feature enhances the versatility of the helmet’s communication system.

Bluetooth capability also allows audio alerts from navigation devices.

Pilots can receive warnings and notifications without additional wiring.

This helps maintain a clean and organized cockpit workspace.

MSA Gallet Flight Helmet

NVG Ready Mount for Night Vision Operations

This helmet includes a night vision goggle mounting bracket.

NVG mounts allow pilots to attach night vision devices for night missions.

Night vision capability supports operations in low light environments.

Helicopter crews often rely on night vision equipment for tactical flights.

Search and rescue teams also benefit from improved nighttime visibility.

The NVG mount allows secure attachment of compatible night vision systems.

Night capable helmets are important for professional aviation operations.

They allow pilots to operate safely during nighttime missions.

This feature increases the operational flexibility of the helmet.

MSA Gallet Flight Helmet

Oregon Aero Comfort Liner

The helmet features a premium Oregon Aero comfort liner system.

Oregon Aero liners are known for exceptional cushioning and support.

They are widely used in professional aviation helmets.

Comfort liners reduce pressure points during extended flight operations.

Pilots benefit from improved helmet stability and reduced fatigue.

This improves overall comfort during long missions.

The liner also helps ensure a secure and stable helmet fit.

Proper fit is important for both safety and communication clarity.

Comfort features enhance the overall pilot experience.

MSA Gallet Flight Helmet

Quick Release Chin Strap System

The helmet includes a quick release chin strap mechanism.

Quick release systems allow pilots to remove the helmet quickly when needed.

This feature improves convenience during ground and flight operations.

Secure chin straps ensure the helmet remains stable during flight.

Proper retention helps maintain headset alignment and communication clarity.

It also contributes to pilot safety during operational conditions.

Quick release designs are commonly used in professional aviation helmets.

They provide both security and ease of use for pilots.

This feature supports efficient cockpit operations.

Durable Professional Aviation Construction

MSA Gallet helmets are built for demanding aviation environments.

They are designed to withstand vibration, wind exposure, and operational stress.

Strong materials help protect pilots during challenging flight conditions.

Professional aviation helmets must balance safety and comfort.

Gallet helmets achieve this through lightweight yet durable construction.

This design allows long term wear without excessive fatigue.

High quality aviation equipment ensures dependable performance during missions.

Pilots rely on reliable protective gear throughout flight operations.

Gallet helmets remain trusted equipment among aviation professionals.

Includes Original MSA Helmet Bag

The helmet includes the original MSA helmet carrying bag.

Helmet bags protect aviation equipment during storage and transportation.

Proper storage helps maintain the condition of the helmet.

Original accessories increase the value of aviation equipment.

Collectors and pilots often prefer complete sets with original components.

The included bag supports safe handling of the helmet.

Transporting helmets inside protective bags prevents cosmetic wear.

It also helps protect delicate communication components.

Proper storage extends the lifespan of aviation equipment.

Ideal for Professional Pilots and Aviation Enthusiasts

This helmet is suitable for professional helicopter pilots and aviation crews.

It provides communication clarity, hearing protection, and operational safety.

Pilots benefit from the integration of advanced headset technology.

The helmet is also appealing to aviation collectors and enthusiasts.

Modern flight helmets represent advanced aviation equipment design.

They make excellent additions to aviation displays.

Aviation training organizations may also value such equipment.

Reliable helmets support communication and hearing protection during training.

Professional grade equipment enhances flight training environments.

Modern Aviation Helmet with Advanced Features

The 2021 Grey MSA Gallet Flight Helmet represents modern aviation equipment engineering.

Its integration with the Bose A20 headset delivers exceptional communication performance.

Advanced features support both comfort and operational capability.

Low flight hours and excellent condition make this helmet especially desirable.

The NVG mount and Bluetooth connectivity add professional functionality.

These features reflect current aviation technology standards.

For pilots and aviation enthusiasts, this helmet offers strong value.

It combines trusted aviation brands with practical flight features.

The result is a professional flight helmet designed for demanding aviation use.

The post 2021 Grey MSA Gallet Flight Helmet appeared first on Aviation Spare Parts Store.

Gentex Dual Visor Helmet. The U.S. Helicopter Pilot Gentex SPH-4B Helmet is an authentic military aviation helmet used by helicopter crews.

This helmet represents a genuine piece of U.S. military aviation equipment.

Collectors value these helmets for their historical significance and operational heritage.

The SPH-4B helmet design was widely used by U.S. military helicopter pilots.

It provided protection, communication capability, and mission ready functionality.

These helmets served extensively during military helicopter operations.

This example features a Vietnam era 1971 main helmet body.

Early production helmets from this period are highly valued by collectors.

They represent an important era in U.S. military aviation history.

Gentex Dual Visor Helmet

Upgraded SPH-5 Dual Visor Configuration

This helmet has been upgraded with an SPH-5 style dual visor assembly.

Dual visor systems allow pilots to quickly switch between clear and tinted protection.

This configuration improves visibility in changing lighting conditions.

The visor housing provides both operational flexibility and enhanced pilot comfort.

Pilots can deploy the visor best suited for current flight conditions.

This feature was commonly adopted in later aviation helmet systems.

Upgraded visor systems are often installed on earlier SPH series helmets.

These improvements combine historical equipment with more modern functionality.

Collectors often appreciate helmets with authentic operational upgrades.

Gentex Dual Visor Helmet

Integrated NVG Mount for Night Operations

This helmet includes a front mounted bracket designed for night vision goggles.

NVG mounts allow helicopter pilots to attach night vision equipment.

This capability supports nighttime aviation missions and low visibility operations.

Night vision technology became widely used in military aviation operations.

Helmets equipped with NVG mounts reflect this advancement in aviation equipment.

Such features increase both operational realism and collector interest.

The NVG bracket remains an important element for aviation equipment displays.

It demonstrates how helmets evolved with advancing mission technology.

Collectors often seek helmets with authentic NVG mounting hardware.

Gentex Dual Visor Helmet

Genuine Gentex Military Helmet Construction

The helmet was manufactured by Gentex Corporation.

Gentex has produced aviation helmets for U.S. military pilots for decades.

Their equipment is known for durability and advanced protective design.

Military aviation helmets must withstand demanding operational environments.

Helicopter crews rely on protective gear during complex flight missions.

These helmets supported numerous aviation units and flight crews.

Their reliability made them standard equipment for many years.

Gentex Dual Visor Helmet

Used by Military Helicopter Crews

SPH series helmets were used extensively by helicopter pilots in active service.

They supported a wide variety of U.S. military aviation missions.

Pilots relied on these helmets for protection and communication.

Aircraft such as the Bell AH-1 Cobra utilized SPH series helmets.

These helicopters served in combat and operational missions worldwide.

The helmet system supported pilots in demanding flight conditions.

Later helicopter platforms also used similar helmet systems.

Aircraft including the AH-64 Apache benefited from similar protective equipment.

These helmets became iconic pieces of military aviation gear.

Gentex Dual Visor Helmet

Authentic Military Identification

The helmet carries National Stock Number 8415-00-144-4981.

NSN numbers help identify official equipment used by the U.S. military.

They confirm the helmet’s classification within military supply systems.

Authentic military stock numbers increase historical credibility.

Collectors often look for equipment carrying proper identification markings.

These details support authenticity within military collections.

Original equipment identifiers help document the helmet’s military heritage.

They provide important information for collectors and historians.

Such details increase the value of historical aviation equipment.

Gentex Dual Visor Helmet

Strong Interest Among Military Aviation Collectors

Helicopter flight helmets remain highly desirable within militaria collections.

Collectors appreciate authentic equipment used by real aviation crews.

Original helmets represent an important part of military aviation history.

They represent one of the most significant periods of helicopter warfare.

Such equipment preserves the legacy of military aviation operations.

Helmets upgraded with later visor systems offer additional collector interest.

They combine historical authenticity with improved operational design features.

This makes them attractive display pieces.

Ideal for Aviation and Military Displays

This helmet is an excellent addition to a military aviation collection.

Collectors often display helmets alongside flight gear or aircraft memorabilia.

These displays highlight the equipment used by helicopter crews.

The helmet also works well in aviation themed offices or hangars.

Many enthusiasts enjoy displaying authentic military aviation artifacts.

Such items add historical character to aviation environments.

Museums and aviation historians also value original flight helmets.

They help illustrate the development of pilot protective equipment.

Helmets like this represent important technological evolution.

Authentic Piece of U.S. Military Aviation History

The Gentex SPH-4B helicopter helmet represents a real piece of aviation history.

It reflects the equipment used by military helicopter pilots.

Such helmets remain important artifacts of aviation development.

The Vietnam era helmet body combined with later upgrades adds unique character.

This combination reflects how equipment evolved over time.

Collectors often appreciate helmets showing operational upgrades.

With its SPH-5 dual visor assembly and NVG mount, this helmet stands out.

It represents both historical authenticity and operational functionality.

This makes it a valuable addition to military aviation collections.

The post Gentex SPH-4B Helmet appeared first on Aviation Spare Parts Store.

Bleed Air Tube Assembly. The 101444-002 Piper PA46-600TP Bleed Air Tube Assembly is an essential component within the aircraft bleed air system.

This assembly supports the controlled distribution of pressurized air throughout the aircraft system.

Reliable bleed air components are critical for safe and efficient aircraft operations.

Aircraft bleed air systems serve multiple operational functions during flight.

They provide air used for environmental control, cabin pressurization, and system operations.

Proper airflow management ensures consistent performance across various aircraft systems.

The bleed air tube assembly is designed specifically for the Piper PA46-600TP aircraft platform.

Precision engineering ensures compatibility with the aircraft’s existing system configuration.

Correct components help maintain proper airflow routing within the aircraft.

Bleed Air Tube Assembly

Designed for Piper PA46-600TP Aircraft

The Piper PA46-600TP is a high performance turboprop aircraft.

It is widely recognized for reliability, advanced avionics, and efficient flight capability.

Proper system components are essential for maintaining aircraft performance standards.

The bleed air tube assembly plays an important role within the aircraft’s pneumatic system.

It transfers pressurized air from the engine to various aircraft subsystems.

Accurate airflow delivery supports system stability during flight operations.

Aircraft maintenance professionals rely on properly designed bleed air components.

Correct installation ensures consistent airflow without leaks or pressure loss.

This contributes to safe and efficient aircraft system performance.

Bleed Air Tube Assembly

Genuine Aviation System Component

This bleed air tube assembly carries part number 101444-002.

Part numbers help aviation technicians confirm compatibility with aircraft systems.

Accurate identification is essential during aircraft maintenance procedures.

Original aircraft components help maintain proper system integration.

Aircraft manufacturers design these parts to meet precise engineering standards.

Using correct components helps ensure reliable aircraft system performance.

Maintenance teams frequently search for authentic parts when servicing aircraft.

Genuine components help maintain the integrity of the aircraft design.

This helps preserve operational reliability across aircraft systems.

Bleed Air Tube Assembly

Important Role in Aircraft Pneumatic Systems

Bleed air systems are critical to many aircraft operational functions.

They provide conditioned air used for pressurization and environmental control systems.

These systems maintain comfortable and safe cabin environments during flight.

Pressurized air is routed through specialized tubing assemblies.

These tubes are engineered to withstand high temperature and pressure conditions.

Durable materials ensure reliable performance in demanding aviation environments.

A properly functioning aircraft tube assembly prevents airflow restrictions.

Smooth airflow ensures consistent performance of connected aircraft systems.

Reliable airflow management is vital for safe aircraft operation.

Bleed Air Tube Assembly

Durable Construction for Aviation Conditions

Aircraft pneumatic components must perform reliably under extreme conditions.

High temperatures and pressure variations occur within bleed air systems.

Strong construction helps the assembly handle these demanding environments.

Aviation grade materials are used to manufacture bleed air components.

These materials help prevent corrosion, fatigue, and structural wear.

Durability ensures the assembly can support long term aircraft operations.

Maintenance professionals value reliable components when servicing aircraft systems.

Strong engineering reduces the likelihood of system failures.

This contributes to safe and efficient aircraft performance.

Ideal for Aircraft Maintenance and Replacement

This aircraft tube is suitable for aircraft maintenance needs.

Aircraft operators often require original components when servicing pneumatic systems.

Correct parts help maintain the integrity of the aircraft design.

Technicians rely on accurate part numbers during maintenance inspections.

The 101444-002 designation allows easy verification for compatibility.

This simplifies sourcing and installation processes.

Used aviation components remain valuable within aircraft maintenance operations.

Reliable parts support aircraft fleets operating with established systems.

Maintenance teams often seek serviceable components for repair projects.

Reliable Component for Aircraft System Performance

The Piper PA46-600TP supports reliable aircraft pneumatic operation.

It ensures proper routing of pressurized air within the aircraft systems.

Consistent airflow contributes to stable system performance.

Aircraft operators rely on properly functioning pneumatic components.

These systems support environmental control and other operational functions.

Reliable assemblies help maintain safe aircraft operating conditions.

For aviation professionals maintaining Piper PA46-600TP aircraft, this component offers practical value.

It supports proper aircraft system functionality.

It remains an important component within the aircraft pneumatic system infrastructure.

The post Bleed Air Tube Assembly appeared first on Aviation Spare Parts Store.